BGF109C 10 channel lcd filter array with esd protection data sheet, v2.0, august 2008 small signal discretes
edition 2008-08-05 published by infineon technologies ag 81726 mnchen, germany ? infineon technologies ag 2008. all rights reserved. legal disclaimer the information given in this document shall in no event be regarded as a guarantee of conditions or characteristics (?beschaffenheitsgarantie?). with respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, infineon technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation warranties of non-infringement of intellectual property rights of any third party. information for further information on technology, delivery terms and conditions and prices please contact your nearest infineon technologies office ( www.infineon.com ). warnings due to technical requirements components may contain dangerous substances. for information on the types in question please contact your nearest infineon technologies office. infineon technologies components may only be used in life-support devices or systems with the express written approval of infineon technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. if they fail, it is reasonable to assume that the health of the user or other persons may be endangered.
BGF109C data sheet 3 v2.0, 2008-08-05 BGF109C revision history: 2008-08-05, v2.0 previous version: 2008-07-17, v1.0 page subjects (major changes since last revision) all preliminary status removed
data sheet 4 v2.0, 2008-08-05 BGF109C 10 channel lcd filter array with esd protection 10 channel lcd filter array with esd protection figure 1 schematic description the BGF109C is a 10 channel rc filter array to provide attenuation of undesired signals in the 800 - 2000 mhz range. all pins are protected against esd up to 15 kv according to iec61000-4-2 (contact discharge). the wafer level package is a green package with a size of only 1.95 mm x 2.07 mm and a total height of 0.60 mm. the package has been improved for increased drop test reliability. feature ? 10 channel integrated rc filter array ? esd protection according to iec61000-4-2 up to 15 kv contact discharge on all ios ? wafer level package with snagcu solder balls ? rohs and weee compliant package ? improved package for increased drop test reliability type package marking chip BGF109C wlp-24-9 BGF109C n0716 bgf109 c_schematic.vsd a1 r1 , 70 ? r2 , 70 ? r3 , 70 ? r4 , 70 ? r5 , 70 ? r6 , 70 ? r7 , 70 ? r8 , 70 ? r9 , 70 ? r10, 70 ? a2 b1 b2 c1 c2 d1 d2 e1 e2 a4 a3 c3 d3 e3 a5 b4 b5 c4 c5 d4 d5 e4 e5
BGF109C 10 channel lcd filter array with esd protection data sheet 5 v2.0, 2008-08-05 figure 2 schematic table 1 maximum ratings parameter symbol values unit note / test condition min. typ. max. voltage at all pins to gnd v p -7 7 v operating temperature range t op -40 +85 c storage temperature range t stg -65 +150 c summed up input power for all pins p in 60 mw t s <70c electrostatic discharge according to iec61000- 4-2 1) at all pins 1) contact discharge v e -15 15 kv table 2 electrical characteristics 1) 1) at t a =25 c parameter symbol values unit note / test condition min. typ. max. series resistors r 1 ... r 10 r 56 70 84 ? line capacitance of each line to gnd c t 28 17 30 pf v r =0v v r =3v leakage currents of lines to gnd i r 100 na v r =3v BGF109C_schematic.vsd a1 r1 , 70 ? r2 , 70 ? r3 , 70 ? r4 , 70 ? r5 , 70 ? r6 , 70 ? r7 , 70 ? r8 , 70 ? r9 , 70 ? r10, 70 ? a2 b1 b2 c1 c2 d1 d2 e1 e2 a4 a3 c3 d3 e3 a5 b4 b5 c4 c5 d4 d5 e4 e5
data sheet 6 v2.0, 2008-08-05 BGF109C 10 channel lcd filter array with esd protection figure 3 capacitance of one line to gnd versus dc voltage figure 4 typical filter characteristics of one filter channel ( z s = z l =50 ? , v r =0v) figure 5 typical cross talk between two filter channels ( z s = z l =50 ? , v r =0v) line capacitance BGF109C 0 5 10 15 20 25 30 0123456 voltage [v] capacitance [pf] insertion loss BGF109C -50 -40 -30 -20 -10 0 100e+3 1e+6 10e+6 100e+6 1e+9 10e+9 freq [hz] s21 [db] cross talk BGF109C -120 -100 -80 -60 -40 -20 0 100e+3 1e+6 10e+6 100e+6 1e+9 10e+9 freq [hz] s21 [db]
BGF109C 10 channel lcd filter array with esd protection data sheet 7 v2.0, 2008-08-05 package outline figure 6 package wlp-24-9 tape and reel specification figure 7 tape for wlp-24-9 wlp-24-9-n-po v01 2) pin a1 corner identified by marking 3) primary datum c and seating plane are defined by the domed crowns of the balls 1) dimension is measured at the maximum solder ball diameter, parallel to primary datum c standoff 0.2 0.05 0.6 0.05 0.1 c c coplanarity 24x 0.08 seating plane c 3) corner index area pin a1 2) c1 c2 c3 c4 c5 d1 d2 d3 d4 d5 e1 e2 e3 e4 e5 b1 b2 b4 a1 a2 a3 a4 b5 a5 4 x 0.4 = 1.6 0.4 (0.175 0.05 ) (0.175 0.05 ) 1.95 b 0.05 0.4 4 x 0.4 = 1.6 (0.235 0.05 ) (0.235 0.05 ) 0.05 2.07 a 0.04 0.25 1) a ?0.05 24x m b wlp-24-9-n-tp v01 pin a1 corner index area 8 0.1 2.24 0.05 2.24 0.05 0.25 0.75 0.1 4
|
